Connecting The Telephone; Dect; Registering Cordless Phone - TP-Link Archer VR200v User Manual

Chapter 5
5 1

Connecting the Telephone

Connect your telephone to the RJ11 ports on the back panel.
FON 1 FON 2
5 2

DECT

The modem router is integrated with DECT (Digital Enhanced Cordless
Telecommunications) function. With this function enabled, you can register your
cordless phone on the modem router and make calls via internet.
5 2 1

Registering Cordless Phone

There are two ways to register your DECT cordless phone.
Method 1: Via DECT Button
1
Set your DECT cordless phone in the registration mode, and then press and hold
the DECT button on the DSL router for about 3 seconds until the Phone LED
flashes.
2
Enter the PIN (Default: 0000) on the DECT cordless phone if required.
Notes:
1. Up to six DECT cordless phones can be registered on the modem router.
2. If you press the DECT button for more than 4 seconds, and the Phone LED still does not light, release the button
and try again.
Method 2: Via Web Management Interface
Follow the steps below to register:
1 Visit http://tplinkmodem.net, and log in with the password you set for the router.
2
Go to Advanced
DSL LAN1 LAN2 LAN3 LAN4/WAN USB1
DECT
> VoIP > Telephony Devices
USB2 Power Power
On/Off
DECT
to open the registration page.
Telephony
19