Table of Contents
Advertisement
Enterprise IP Phone
DND
If the key is configured as DND key, you are allowed to active the DND function
immediately when you press it. Press it again to deactivate DND mode.
To assign the key as DND:
1) Choose DSS Key->Memory Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose DND from the list.
2) Press Confirm button to save the changes.
Redial
If the key is configured as Redial key, press this key under the idle status, it will fetch
the last dialed number, then you can choose a special line to call out by pressing the line
keys.
To assign the key as Redial:
1) Choose DSS Key->Memory Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose Redial from the list.
2) Press Confirm button to save the changes.
Call Return
When the key is configured as Call Return key you are allowed to dial out the last phone
call you received.
To assign the key as Call Return:
1) Choose DSS Key->Memory Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose Call Return from
the list.
2) Press Confirm button to save the changes.
Pick Up
When you configure a Pick Up key, you specify the extension that you want to monitor.
Then, when the monitored extension receives a call, you can press this key to pick up
the incoming call.
To assign the key as Pick Up:
1) Choose DSS Key->Memory Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose Pick Up from the
list, and enter the number you want to pick up in the value field.
2) In the "Line" field, select a line for which to apply this key.
3) Press Confirm button to save the changes.
- 48 -
Trouble Shooting
Advertisement
Table of Contents
