Table of Contents
Advertisement
Enterprise IP Phone
Call Park
Call Park is a feature that allows a person to put a call on hold at one telephone set and
continue the conversation from any other telephone set.
The "call park" feature is activated by pressing a preprogrammed button or a special
sequence of buttons. When the conversation which is monitored was transferred to an
unused extension number, you can press this key to retrieve the call.
To assign the key as Call Park:
1) Choose DSS Key->Memory Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose Call Park from the
list, and enter the number you want to park in the value field.
2) In the "Line" field, select a line for which to apply this key.
3) Press Confirm button to save the changes.
Group Listening
When the key is configured as Group Listening key, you are allowed to enable the
Speakerphone and Handset/Headset mode at the same time. It is suitable for the group
conversation which has more than one person at one side. You are able to speak and
listen using handset/headset; meanwhile the others near by can listen using
speakerphone. You can get back to the previous mode by pressing the key again.
To assign the key as Group Listening:
1) Choose DSS Key->Memory Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose Group Listening
from the list.
2) Press Confirm button to save the changes.
Voice Mail
When the key is configured as Voicemail key you are allowed to access voicemail
quickly by pressing this key.
To assign the key as Voicemail:
1) Choose DSS Key->Memory Key, choose one of the key you want to make the
assignment, there is a pull-down menu in the Type field, choose Voice Mail from the
list, and enter the number you want to set as the voice mail box in the value field
2) In the "Line" field, select a line for which to apply this key
3) Press Confirm button to save the changes.
- 49 -
Trouble Shooting
Advertisement
Table of Contents
