GPS Tracker mp2 User Manual page 11

Gpstracker.net.in
Freedom is lost now...!
5.3.2 Setting
You can send message "SF" with your cell phone to your reset phone numbers in Tracker to
set it. After that, if your vehicle is illegal moved or abnormal vibrated; it will inform you about it via
SMS right now.
5.3.3 Cancelling
You can send message "CF" with your cell phone to your reset phone numbers in Tracker to
cancel it. After that, the safeguard is closed successfully.
5.3.4 Location
You can send message "DW" with your cell phone to your reset phone numbers in Tracker,
then the Tracker will answer the location of your vehicle via SMS.
5.3.5 Orientation-- The latitude and longitude
You can send message "DWJE" with your cell phone to your reset phone numbers in Tracker, then
the Tracker will only answer the exact data of the latitude, longitude and the site ID of your vehicle
instead of the words description of the location.
Command list
Default password=000000
Description
Get current location
Change user's password
Set interval for automatic timed
report (sms report only)
Set preset phone number for SOS
button
Set over speed alert
When tracker speeds higher
than the preset value, it will
send one over speed alert to
the SOS preset number.
Set Geo-fence alert
When tracker moves out of
preset scope, it will send one
Command
W000000,000
W******,001,######
W000000,002,XXX
W000000,003,F,P,T
W000000,005,XX
W000000,006,XX
Remarks
Get current location of tracker
****** is old password
###### is new password
max 6 characters.
XXX is the interval in minute. If
XXX=000 it will stop tracking
F=0, to turn off this fuction;
F=1, only sending SMS;
F=2, only calling preset phone number;
F=3, both SMS and calling (default)
P=1, set a authorized number for SOS
button
P=2, set a authorized number for 1 button
P=3, set a authorized number for 2 button
P=4, set a authorized number for 3 button
T: Preset phone number. Max. 16 digits
XX (the preset value of speed)
=00 , to turn off this function
=[01, 20] (unit: 10Km/h)
For example, W000000,005,08, it will
sent alert when it is over 80Km/h
XX ( preset distance to original place )
=00, to turn off this function
=01, 30m