Advertisement
Instructions for kit #71K
Assemble the Dormers
1. Glue together a Dormer Window frame,
Pediment, Stool Cap, and Triangle. Set the
window into the roof's cutout to help the parts
line up in back.
2. Glue Dormer Sides to the window as-
sembly lined up at the top edge of the Triangle.
3. Check the fit of the dormers on the
house. Trim the lower corners of the roof cut-
out for a good fit. Glue the dormer to the roof,
straight up-and-down.
4. Test then glue and tape together the Left
and Right Dormer Roofs. Glue the Dormer
Roofs to the Dormer Triangle and Front Roof.*
Pre-assembled windows and Door
Pull the pin out of the bottom of the Door to disassemble it for painting
Install all the painted Windows and Door in their openings.
Glue Pediments and Stool Caps to the Windows
*Builder's Note: it
is easiest to shingle
the roof to here be-
fore attaching the
Dormer Roofs.
Pediment
Dormer Window Frame
Stool Cap
Lined up
Lined up
Pediment
Stool Cap
Dormers (4) page 11
Dormer Triangle
Advertisement
