Using The Keypad; Using The Intercom; Control By Sms - AES CellCOM Plus AB Installation & User Manual

Using the standard codes...
Once you have exited out of programming mode, simply enter the user code.
Using super user codes
? ? ? ?
? ? ? ?
? ? ? ?
This cellular intercom can dial up to 4 numbers in sequence for any call button when pressed..
Dialling.....
Any user receiving the call can answer, speak to the visitor, and press the following digits on their
mobile or fixed line telephone to control the relays on the device...
Relay 1
Press 1 to trigger (use this mostly)
Press 2 to Latch or hold open
Press 3 to unlatch or close.
This intercom allows the user to send SMS commands to control the relays and check status as
follows...
1234#1# - Relay 1 momentary trigger.
1234#2# - Relay 1 latch ON or hold ON.
1234#3# - Relay 1 unlatch or switch OFF.
P a g e | 15

Using the keypad

# 1
Activate output 1
# 2
Activate output 2
# 3
Activate output 3

Using the intercom

Phone 1
2
1
4 5
8
7
0
*

Control by SMS

Phone 2
Relay 2
3
Press 4 to trigger
6
Press 5 to Latch or hold open
9
Press 6 to unlatch or close
#
1234#4# - Relay 2 momentary trigger.
1234#5# - Relay 2 latch ON or hold ON.
1234#6# - Relay 2 unlatch or switch OFF.
Phone 3