Table of Contents
Advertisement
Using the remote control
Location of the remote control
•
Keep the remote control where its signal can reach the receiver
of the indoor unit. (a maximum distance of 8m
is allowed).
•
When you select the timer operation, the remote control
automatically transmits a signal to the indoor unit at the
specified time.
•
If you keep the remote control in a position that hinders proper
signal transmission, a time lag of up to 15 minutes may occur.
•
When the remote control sends out a signal, the
symbol
will flicker for about 1 second on the display.
The indoor unit will acknowledge the signal with a beep when
it receives an effective signal.
caution
WARNING
•
The air conditioner will not operate if curtains, doors or other
materials block the signals from the remote control
to the indoor unit.
•
Prevent any liquid from falling into the remote control.
Do not expose the remote control to direct sunlight
or heat.
•
If the infrared signal receiver on the indoor unit is exposed to
direct sunlight, the air conditioner may not function properly.
Use curtains to prevent the sunlight from falling on the receiver.
•
If other electrical appliances react to the remote control,
either move these appliances or consult your local dealer.
Prior to Operation
1
Contact a qualified installer for installation.
2
Plug in the power plug properly.
3
Do not use a damaged or non-standard power cord.
4
Do not share the same outlet with other appliances.
5
Do not use an extension cord.
6
Do not start/stop operation by plugging /unplugging the
power cord.
6
Using the remote control
Back view
Temperature/
Humidity sensor
window
Usage
Exposure to direct airflow from the air conditioner for an extended
period of time could be hazardous to your health. Do not expose
people, pets or plants to the direct airflow for an extended period.
Cleaning and maintenance
1
Do not touch the metal parts of the unit when removing the
filters. Injuries can occur when handling sharp
metal edges.
2
Do not use water to clean inside the air conditioner. Exposure
to water can destroy the insulation, leading to possible electric
shock.
3
When cleaning the unit, first make sure that the power and
circuit breaker are turned off.
Service
For repair and maintenance, contact your authorised
service centre.
Hide quick links:
Advertisement
Table of Contents
