Quickstart Guide - Kelvinator KSV25HRD User Manual

Quickstart guide

2
1
9
5
8
The icons displayed on the indoor unit:
：Cool ： Power
：Dry
：Set temp
：Heat
General operation
1. Once power is connected, press the ON/OFF button (1) and
the air conditioner will start to run.
Note: When the power is connected the main louver will close
automatically
2. Press the mode button (2) to select the desired runnng mode
(heating, cooling, fan only or dehumidify).
3. Pressing or button (3) to select the desired temperature.
(It is unnecessary to set the temperature
in AUTO MODE.)
4. Pressing the fan button (4) will allow you to select from
6 different fan speeds from high to low, including an AUTO
setting.
5. The swing buttons (5) will allow you to select horizontal (H) or
vertical (V) swing of the air guding louvers.
Optional operations
6. Press the SLEEP button (6) to select the sleep mode.
7. The TIMER ON and TIMER OFF buttons (7) can be used to set
automatic start and stop for the air conditioner, (see detailed
instructions for more information)
8.
The light button (8) can be used to swith on or off the display
on the front panel of the indoor unit.
9. Press TURBO button, can realize the ON and OFF of TURBO
function.
Special functions
This function indicates that moisture on evaporator of indoor unit
will be blowed after the unit is stopped to avoid mould.
X-FAN (Air Purge)
When the X-fan function is on, the fan will continue to run for 2
minutes at low speed after the off button is pressed in order to
purge the air conditioner of all moisture to avoid the growth of
mould.
3
About AUTO RUN
4
When AUTO RUN mode is selected, the set temperature will not be
displayed on the LCD, the unit will be in accordance with the room
temperature automatically to select the suitable running method
and to make ambient comfortable.
Turbo function
6
The Turbo function operates a higher than normal fan speed to
allow for rapid heating or cooling.
Remote lock
7
Press SWING-V and ION-FILTER buttons simultaneously to lock or
unlock the keyboard. If the remote control is locked, the icon
be displayed on it, in which case, press any button, the mark will
flicker three times. If the keyboard
is unlocked, the mark will disappear.
Switch between Centigrade and Farenheit
With the air conditinioner switched off, press the SWING-H and
ION-FILTER buttons simultaneously to switch between °C and °F .
Energy saving
Press ION-FILTER and CLOCK simultaneously to start or stop
enegry saving funtion. The remote control display will show "SE"
when this function is active.
Low heat mode
In heating mode, pressing ION-FILTER and CLOCK simultaneously
will put the air conditioner into a low heat mode that will operate to
a temperature of 8°C. Repeat the operation to quit the function.
will
5
Quickstart guide