Remote control specifications
Rated voltage
Signal receiving range
ON/OFF
MODE
FAN
SLEEP
FRESH
TURBO
CLEAN
6
Remote control specifications
3.0V (2x 1.5V AAA)
8m
SHORT
CUT
TIMER
ON
TEMP
TIMER
OFF
SELF
FOLLOW
LED
ME
Using the remote control
Location of the remote controller
•
Use the remote controller within a distance of 8 meters from
the appliance, pointing it towards the receiver. Reception is
confirmed by a beep.
caution
WARNING
•
The air conditioner will not operate if curtains, doors or other
materials block the signals from the remote controller to the
indoor unit.
•
Prevent any liquid from falling into the remote controller. Do
not expose the remote controller to direct sunlight or heat.
•
If the infrared signal receiver on the indoor unit is exposed to
direct sunlight, the air conditioner may not function properly.
•
Use curtains to prevent the sunlight from falling on the receiver.
•
If other electrical appliances react to the remote controller,
either move these appliances or consult your local dealer.
•
Do not drop the remote controller. Handle with care.
•
Do not place heavy objects on the remote controller,
or step on it.
Location of the remote controller
•
The remote controller can be attached to a wall or pillar by
using a remote controller holder.
•
Before installing the remote controller, check that the air
conditioner receives the signals properly.
•
Install the remote controller holder with two screws.
•
For installing or removing the remote controller, move it up or
down in the holder.