Table of Contents
Advertisement
caution
When the air filter is to be removed, do not touch the
metal parts of the unit.
It may cause an injury.
Do not clean the air conditioner with water.
Water may enter the unit and degrade the insulation.
It may cause an electric shock.
Ventilate the room well when used together with
a stove, etc.
An oxygen shortage may occur.
Do not put a pet or house plant where it will be
exposed to direct air flow.
This could injure the pet or plant.
Do not use for special purposes.
Do not use this air conditioner to preserve precision
devices, food, pets, plants, and art objects. It may
cause deterioration of quality, etc.
Stop operation and close the window in storm
or hurricane.
Operation with windows opened may cause wetting of
indoor and soaking of household furniture.
Hold the plug by the head of the power plug when
taking it out.
It may cause electric shock and damage.
Turn off the main power switch when not using
the unit for a long time.
It may cause failure of product or fire.
Do not place obstacles around air-inlets or inside
of air-outlet.
It may cause failure of appliance or accident.
Ensure that the installation bracket of the outdoor
appliance is not damaged due to prolonged exposure.
If bracket is damaged, there is concern of damage due
to falling of unit.
Always insert the filters securely. Clean filter once
every two weeks.
Operation without filters may cause failure.
Do not use strong detergent such as wax or
thinner but use a soft cloth.
Appearance may be deteriorated due to change
of product color or scratching of its surface.
Do not place heavy object on the power cord and
ensure that the cord is not compressed.
There is danger of fire or electric shock.
If water enters the unit, turn the unit off and
disconnect the power, contact a qualified
service technician.
Use caution when unpacking and installing.
Sharp edges could cause injury.
Do not drink water drained from air conditioner.
It contains contaminants and could make you sick.
4 Important safety instructions Kelvinator Air Conditioning
Prior to Operation
Preparing for operation
1
Contact an installation specialist for installation.
2
Plug in the power plug properly.
3
Do not use a damaged or non-standard power cord.
4
Do not share the same outlet with other appliances.
5
Do not use an extension cord.
6
Do not start/stop operation by plugging /unplugging the
power cord.
Usage
1
Exposure to direct airflow for an extended period of
time could be hazardous to you health. Do not expose
occupants, pets or plants to direct airflow for extended
periods of time.
2
Due to the possibility of oxygen deficiency, ventilate
the room when used together with stoves or other
heating devices.
Cleaning and maintenance
1
Do not touch the metal parts of the unit when removing
the filter. Injuries can occur when handling sharp
metal edges.
2
Do not use water to clean inside the air conditioner.
Exposure to water can destroy the insulation, leading to
possible electric shock.
3
When cleaning the unit, first make sure that the power
and circuit breaker are turned off.
Service
For repair and maintenance, contact your authorised
service dealer.
Operating temperature
Cooling Mode
Indoor
Outdoor
Max.
Min.
Max.
Min.
32°C
17°C
35°C
18°C
Heating Mode
Indoor
Outdoor
Max.
Min.
Max.
Min.
30°C
17°C
24°C
-5°C
Note: Optimum performance will be achieved within these
operating temperatures.
Using the remote control
Location of the remote control
•
Keep the remote control where its signals can reach the
receiver of the indoor unit. (a distance of 8m is allowed).
•
When you select the timer operation, the remote control
automatically transmits a signal to the indoor unit at the
specified time.
•
If you keep the remote control in a position that hinders
proper signal transmission, a time lag of up to 15 minutes
may occur.
Back view
Temperature/
Humidity sensor
window
caution
•
The air conditioner will not operate if curtains, doors or
other materials block the signals from the remote control
to the indoor unit.
•
Prevent any liquid from falling into the remote control.
Do not expose the remote control to direct sunlight
or heat.
•
If the infrared signal receiver on the indoor unit is
exposed to direct sunlight, the air conditioner may not
function properly. Use curtains to prevent the sunlight
from falling on the receiver.
•
If other electrical appliances react to the remote
control, either move these appliances or consult your
local dealer.
Replacing batteries
The remote control uses two dry batteries (AAA)
1
Slide the cover of the battery compartment off according
to the arrow direction, then replace the old batteries with
new ones.
2
Insert the new batteries making sure that the(+) and (-) of
battery are installed correctly.
3
Reattach the cover by sliding it back into position.
After replacing the batteries, set the remote control clock.
NOTE: Do not dispose batteries as unsorted municipal
waste. Collection of such waste separately for special
treatment is necessary.
Features of the remote control
❄
1
2
3
4
5
6
1
MODE Select Button:
Each time you push the button, a mode is selected in
a sequence that goes from AUTO DRY FAN COOL and
HEAT, as the following figure indicates:
AUTO
DRY
FAN
COOL
HEAT
NOTE: Cooling only models do not have HEAT mode.
2
ON/OFF Button:
Push this button to start or stop operation. If you keep
pressing for more than 2 seconds, the SELF CLEAN
feature will activate.
3
CLOCK/TIMER Button:
First press of the button will initiate the TIMER ON
setting program, the timer on indicator light illuminates
and the setting time flashes at 1Hz. Second press of the
button will activate the TIMER OFF setting program, the
timer off indicator light illuminates and the setting time
flashes at 1Hz.
Third press of the button will revert back to displaying
the clock time.
Kelvinator Air Conditioning using the remote control 5
7
8
9
10
8
11
Hide quick links:
Advertisement
Table of Contents
