Viewing The Last Call Log; Acknowledgement Options; Viewlog - Menvier Security SD1+ Operation & Maintenance Manual

Viewing The Last Call Log

When a call is successfully acknowledged, the SD1+ stores the
event in a "Last Call Log".
The log may then be viewed as follows:
Ensure that the SD1+ is initialised and the display is showing
1.
" " (see page 4).
Press 9 and the display will show "
2.
Press [ and the display will show the Last Call Log i.e. "
3.
the log is empty, or "
acknowledged by recipient 3). If the display shows "
then none of the calls were acknowledged.
Press [ to accept the option displayed and return to "
4.

Acknowledgement Options

Once the SD1+ has made its call and delivered its message, it
requires a signal to say that the message has been successfully
received. This is done by the recipient pressing the number "8"
button on their telephone. When the SD1+ has been
acknowledged, it will shut down until it is triggered again. This option
determines how many times the unit must be acknowledged
before it shuts down. These options include: Any 1 person (
Any 2 people (
or nobody at all (
Ensure that the SD1+ is initialised and the display is showing
1.
" " (see page 4).
Press 0 and the display will show "
2.
Press [ and the display will show the acknowledgement option
3.
+
that is currently programmed i.e. "
If required, the other 4 acknowledgement options
"ANY-2", "
scrolled through by pressing the
Press [ to accept the option displayed and return to "
4.
" (Alarm on trigger input A
), Any 3 people (
).
", " " and "
".
), All 4 people (
".
".
", can be
key.
SD1+
1
????
READY
2
9

VIEWLOG-

3
[
3
No Events Logged
BLANK
" if
B
Last Message Sent(A to Tel 3)
A) --3-
"
4
[
READY
".
SD1+
1
????
READY
2
0
),
CLRBY-
)
3
[
3
Needs 1 Acknowledgement
ANY - 1
B
Needs 2 Acknowledgements
ANY - 2
B
Needs 3 Acknowledgements
ANY - 3
B
Needs 4 Acknowledgements
ANY - 4
B
Needs No Acknowledgement
NO-ONE
4
[
READY
".
7