Siemens SIMATIC CP 340 User Manual page 99

Identification data of the CP 340 module
Table 5- 4 Identification data of the CP 340 module
Identification data
Index 1 (data record 231/read only)
Manufacturer
Device name
Device serial number
Hardware revision
Software revision
Statistical
revision no.
Profile_ID
Profile–specific type
I&M version
I&M supported
Index 2 (data record 232/read and write)
HID
LD
PtP coupling and configuration of CP 340
Manual, 04/2011, A5E00369892-03
Access Default setting
Read 00 2A hex (= 42 dec)
(2 bytes)
Read 6ES7 340–1xH02–0AE0
(20 bytes)
Read The serial number of the module is saved to this parameter. This structure
(16 bytes) allows the unique identification of the module.
Read Provides information about the product version of the module.
(2 bytes)
Read Provides information about the firmware version of the module.
(4 bytes)
Read -
(2 bytes)
Read F6 00 hex
(2 bytes)
Read 00 04 hex (= 4 dec)
(2 bytes)
Read 00 00 hex (= 0 dec)
(2 bytes)
Read 00 01 hex (= 1 dec)
(2 bytes)
Read/ -
write
(max.
32 characters)
Read/ -
write
(max.
22 characters)
Configuring and Parameterizing the CP 340
5.5 Identification data
Description
The name of the manufacturer is saved to this
parameter (42 dec = Siemens AG).
Order number of the module
x = A(RS232), B(TTY), C(RS422/485)
Not supported
Internal parameter
(to PROFIBUS DP)
Internal parameter (communication module, to
PROFIBUS DP)
Internal parameter
(to PROFIBUS DP)
Internal parameter (I&M0 and I&M1, to
PROFIBUS DP)
Plant designation of the module.
Location designation of the module.
99