11
C H A P T E R
L2 Repeater Boards
This chapter explains how to remove and install an L2 Repeater board.
11.1
L2 Repeater Board
Caution – This procedure requires the system to be extended out of the system
cabinet on its slides. You must extend the system cabinet stabilizer bar.
The system supports up to two L2 Repeater boards, RP0 and RP1, which are located
at the top of the system (
).
FIGURE 11-1
L2 Repeater board, RP0
L2 Repeater board, RP2
Location of Boards, Modules, and Bays—System Top View
FIGURE 11-1
11-1