Page 1
™ Installing Sun Fire FC-AL Backplane Firmware Sun Microsystems, Inc. 901 San Antonio Road Palo Alto, CA 94303-4900 U.S.A. 650-960-1300 Part No. 816-2577-10 September 2001, Revision A...
Page 2
Sun, Sun Microsystems, le logo Sun, AnswerBook, AnswerBook2, docs.sun.com, OpenBoot, SunSwift, SunVTS, JumpStart, SunSolve, et Solaris sont des marques de fabrique ou des marques déposées, ou marques de service, de Sun Microsystems, Inc. aux Etats-Unis et dans d’autres pays. Toutes les marques SPARC sont utilisées sous licence et sont des marques de fabrique ou des marques déposées de SPARC International, Inc.
Page 3
Before you can flash update the backplane, the firmware image must be copied from the Supplement CD to the Sun Fire 880 system disk. If you use Solaris Web Start to install the Supplement CD software, the Sun Fire 880 FC-AL Backplane Firmware is not included in the default installation.
Page 4
/usr/platform/SUNW,Sun-Fire-880/lib/images/int_fcbpl_fw. enclosure_name is the enclosure name assigned to the Sun Fire 880 internal storage array—by default, FCloop. If you need to verify the enclosure name first, use the luxadm probe subcommand.
Page 5
5. To verify that the flash update process has successfully completed, type the following luxadm subcommand: # luxadm display enclosure_name Where enclosure_name is the enclosure name assigned to the Sun Fire 880 internal storage array. The command output shows the status of each SSC100 in the system. The following is an excerpt of sample output for a dual-backplane system.
Page 6
Installing Sun Fire 880 FC-AL Backplane Firmware • September 2001...
Need help?
Do you have a question about the Fire 880 and is the answer not in the manual?
Questions and answers