9. Disconnect the following cables from the IB_SSC assembly: disk drive power
cable, SCSI data cable, SCC card reader cable, and DVD-ROM drive data/power
cable (
Caution – Do not disconnect the SCC card reader cable end that connects to the SSC
card reader or the SCSI data cable end that connects to the removable media
backplane. Those cable ends are soldered and cannot be removed.
Disk drive power
cable
DVD-ROM drive
data/power
connector
SCC card
reader connector
Do not disconnect
SCSI data
connector
Do not disconnect
FIGURE 6-7
10. Remove the foam air flow filter in front of the IB fan intake.
11. Locate the convex spring behind the right side of the removable media module.
Press it in so it becomes concave (
6-8
Sun Fire E2900 System Service Manual • May 2006
).
FIGURE 6-7
IB_SSC Assembly Cable and Connector Locations and the Removable Media
Module Retaining Spring
).
FIGURE 6-7