Trunk Numbers - Gigaset hybird 120 Edition Manual

5 Numbering
Field
Signal fixed out num-
ber
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu
Field
Type of Number
Call Hold inside the
PBX system

5.1.2 Trunk Numbers

In the menu Numbering->Trunk Settings ->Trunk Numbers you assign the external
numbers and the name indicated in a system telephone display to the external connec-
tions you've defined.
An external connection can be configured as a point-to-multipoint or point-to-point con-
nection; in the process, the connection description is defined. The intended port name is
then assigned to this connection. The port name (Description) can be defined under
Physical Interfaces->ISDN Ports->ISDN External for the module connection.
78
Description
The function is enabled with
The function is disabled by default.
Only for Outgoing Signalisation =
You can display a fixed number for all outbound "external"
calls, e.g. your head office number.
Description
Select the number type for outgoing calls.
Possible values:
• : The standard system setting (country
setting) is used.
• : Select this setting if the number type "unknown" is
to be signalled.
• : This is an extension number.
• : This is a national number (area code + extension
number).
Select whether a telephone call is to be put on hold in the sys-
tem without losing the connection.
The function is activated by selecting
The function is disabled by default.
Gigaset Communications GmbH
.
.
hybird 120 Gigaset Edition