Analogue Internal (Fxs) - Gigaset hybird 120 Edition Manual

Gigaset Communications GmbH
Fields in the Advanced Settings menu
Field
Busy Tone Detection
Dial Tone Detection
Dial Tone Pause
End-of-Selection Sig-
nal

3.3.2 Analogue Internal (FXS)

The Analogue Internal (FXS) menu displays all of your system's available analogue in-
ternal connections.
The menu Physical Interfaces->Analogue Ports->Analogue Internal (FXS) consists of
the following fields:
Values in the Analogue Internal (FXS) list
hybird 120 Gigaset Edition
Description
Select whether Busy Tone Detection should be used.
The function is activated by selecting
The function is enabled by default.
Select whether Dial Tone Detection should be used.
The function is activated by selecting
The function is enabled by default.
If the Dial Tone Detection is enabled and the external dial
tone has been recognised, your hybird 120 immediately starts
to dial.
Only for Dial Tone Detection disabled.
Enter the value you want which the system is to wait for, as a
maximum, when dialling a telephone number, before it begins
dialling.
You can switch on the Dial Tone Pause if the hybird 120 fails
to recognise the external dial tone or if no dial tone is being
sent. You must decide the duration of the Dial Tone Pause .
Possible values are whole number values between
and seconds.
Enter the time that the system is to wait, after dialling a num-
ber, before it considers the telephone number to be complete
and makes the connection. The default value is
3 Physical Interfaces
.
.
second
seconds.
59