Dial Control - Gigaset hybird 120 Edition Manual

Gigaset Communications GmbH
Field
Target Number "On no
reply"
Target Number "On
busy"
Target Number "Imme-
diate"

7.1.3 Dial Control

In the Call Routing->Outgoing Services->Dial Control menu, you block specific num-
bers/partial numbers, or release these .
You wish to prevent dialling of specific numbers in the system, e. g. the numbers of ex-
pensive value-added services. Enter these numbers or partial numbers into the dial
ranges list of blocked numbers. All subscribers subject to dial ranges cannot dial these
numbers. However, if you should need specific numbers from a blocked sector, you can
clear these via the dial ranges list of cleared numbers.
You can block specific numbers or prefixes with the blocked numbers list. You can clear
the blocked numbers or prefixes with the cleared numbers list. If a number entered as a
cleared number is longer than one entered as a blocked number, this number can be di-
alled. When you dial a number, dialling after the blocked digit is terminated and you hear
the busy tone. You can assign each user individually to the dial ranges in the user set-
tings.
Example: Blocked number
Cleared number
ber of digits, e. g.
the list of blocked numbers, dialling of the number is prevented.
hybird 120 Gigaset Edition
Description
•
•
Enter the number to which incoming calls shall be forwarded
after time.
Enter the number to which incoming calls shall be forwarded
on busy.
Enter the number to which incoming calls shall be forwarded
immediately.
, all external numbers that begin with
, dialling can proceed. All external numbers that begin with
can be dialled. If two identical numbers (same number sequence and same num-
and
Note
Subscribers who enjoy full or partial dialling access (no outside line access)
are authorised for dialling of cleared numbers via the list of cleared num-
bers.
(default value)
) are entered in the list of cleared numbers as well as
are blocked.
7 Call Routing
135