Reboot; System Reboot - Gigaset hybird 120 Edition Manual

16 Maintenance
Field
Firmware Update

16.4 Reboot

16.4.1 System Reboot

In this menu, you can trigger an immediate reboot of your device. Once your system has
restarted, you must call the GUI again and log in.
Pay attention to the LEDs on your device. For information on the meaning of the LEDs,
see the Technical Data chapter of the manual.
If you wish to restart your device, click the OK button. The device will reboot.
378
Description
When it has been sent, the number is displayed on the tele-
phone under Menu->Service->Software Update. If you press
the OK button, the number is available in redial.
Set a period for updating the system software. To do this, se-
lect the Start Time and the Stop Time.
Note
Before a reboot, make sure you confirm your configuration changes by click-
ing the Save configuration button, so that these are not lost when you re-
boot.
Gigaset Communications GmbH
hybird 120 Gigaset Edition