Gigaset hybird 120 Edition Manual page 371

Gigaset Communications GmbH
You can use the Enabled option to enable or disable the corresponding entry.
15.9.1.1 Edit or New
You configure the hotspot networks in the Local Services->HotSpot Gateway->HotSpot
Gateway->
The Local Services->HotSpot Gateway->HotSpot Gateway->
following fields:
Fields in the menu Basic Parameters
Field
Interface
Domain at the HotSpot
Server
Walled Garden
hybird 120 Gigaset Edition
menu. Choose the New button to set up additional Hotspot networks.
Description
Choose the interface to which the Hotspot LAN or WLAN is
connected. When operating over LAN, enter the Ethernet inter-
face here (e. g. en1-0). If operating over WLAN, the WLAN in-
terface to which the access point is connected must be selec-
ted.
Caution
For security reasons you cannot configure your
device over an interface that is configured for the
Hotspot. Therefore take care when selecting the
interface you want to use for the Hotspot.
If you select the interface over which the current
configuration session is running, the current con-
nection will be lost. You must then log in again
over a reachable interface that is not configured
for the Hotspot to configure your device.
Enter the domain name that you used when setting up the Hot-
Spot server for this customer. The domain name is required so
that the Hotspot server can distinguish between the different
clients (customers).
Enable this function if you want to define a limited and free
area of websites (intranet).
The function is not activated by default.
15 Local Services
menu consists of the
359