Ip Pools - Gigaset hybird 120 Edition Manual

12 WAN
Field
Proxy ARP Mode
DNS Negotiation

12.1.4 IP Pools

The IP Pools menu displays a list of all IP pools.
Your device can operate as a dynamic IP address server for PPP connections. You can
use this function by providing one or more pools of IP addresses. These IP addresses can
be assigned to dialling-in connection partners for the duration of the connection.
Any host routes entered always have priority over IP addresses from the address pools.
This means that, if an incoming call has been authenticated, your device first checks
whether a host route is entered in the routing table for this caller. If not, your device can
allocate an IP address from an address pool (if available). If address pools have more
than one IP address, you cannot specify which connection partner receives which ad-
248
Description
• : OSPF is activated for this interface, i.e. routes are
propagated or OSPF protocol packets sent over this inter-
face.
• : OSPF is disabled for this interface.
Select whether and how ARP requests from your own LAN are
to be responded to for the specified connection partner.
Possible values:
• (default value): Deactivates Proxy ARP for this
connection partner.
• : Your device only responds to an ARP re-
quest if the status of the connection to the connection partner
is or . In the case of
responds to the ARP request; the connection is not set up
until someone actually wants to use the route.
• : Your device responds to an ARP request only if
the status of the connection to the connection partner is
i.e. a connection already exists to the connection partner.
Select whether your device receives IP addresses for Primary
DNS Server and Secondary DNS Server and WINS Server
Primary and Secondary from the connection partner or sends
these to the connection partner.
The function is enabled with
The function is enabled by default.
Gigaset Communications GmbH
, your device only
,
.
hybird 120 Gigaset Edition