Ipv4 Routing Table - Gigaset hybird 120 Edition Manual
Ip pbx
Hide thumbs
Also See for hybird 120 Gigaset Edition:
- Quick manual (2 pages) ,
- Installation instructions manual (8 pages)
Table of Contents
Advertisement
Gigaset Communications GmbH
Field
Mode
10.1.2 IPv4 Routing Table
A list of all IPv4 routes is displayed in the Network->Routes->IPv4 Routing Table menu.
The routes do not all need to be active, but can be activated at any time by relevant data
traffic.
hybird 120 Gigaset Edition
Description
•
Point according to RFC 3260 is used to signal the priority of
IP packets (indicated in hexadecimal format).
•
: The TOS value is specified in binary
format, e.g. 00111111.
•
: The TOS value is specified in decim-
al format, e.g. 63.
•
hexadecimal format, e.g. 3F.
Enter the relevant value for
,
,
.
Select when the interface defined in Route Parameters ->In-
terface is to be used.
Possible values:
•
(default value): The route can be used if
the interface is "up". If the interface is "dormant", then dial
and wait until the interface is "up".
•
: The route can always be used.
•
interface is "up". If the interface is "dormant", then select and
use the alternative route (rerouting) until the interface is "up".
•
: The route can be used when the interface
is "up".
•
: The route can be used when the interface
is "up". If the interface is "dormant", then dial and wait until
the interface is "up". In this case, an alternative interface with
a poorer metric is used for routing until the interface is "up".
: Differentiated Services Code
: The TOS value is specified in
,
,
and
: The route can be used when the
10 Networking
191
Advertisement
Table of Contents
