Chapter 2 System Management; Status - Gigaset hybird 120 Edition Manual

2 System Management

Chapter 2 System Management

The System Management menu contains general system information and settings.
You see a system status overview. Global system parameters such as the system name,
date/time, passwords and licences are managed and the access and authentication meth-
ods are configured.

2.1 Status

If you log into the GUI, your device's status page is displayed, which shows the most im-
portant system information.
You see an overview of the following data:
• System status
• Your device's activities: Resource utilisation, active sessions and tunnels
• Status and basic configuration of the LAN, WAN, ISDN, and ADSL interfaces
• Information on plugged add-on modules (if any)
You can customise the update interval of the status page by entering the desired period in
seconds as Automatic Refresh Interval and clicking on the Apply button.
The menu System Management->Status consists of the following fields:
Fields in the System Information menu
Field
Uptime
System Date
Serial Number
BOSS Version
Back-up of configura-
2
Caution
Under Automatic Refresh Interval do not enter a value of less than
seconds, otherwise the refresh interval of the screen will be too short to
make further changes!
Value
Displays the time past since the device was rebooted.
Displays the current system date and system time.
Displays the device serial number.
Displays the currently loaded version of the system software.
Indicates whether a backup configuration is available on the
Gigaset Communications GmbH
hybird 120 Gigaset Edition