Dhcp Configuration - Gigaset hybird 120 Edition Manual

15 Local Services
15.4.1.1 Edit or New
Choose the New button to set up new IP address pools. Choose the
ing entries.
The Local Services->DHCP Server->IP Pool Configuration->New menu consists of the
following fields:
Fields in the menu Basic Parameters
Field
IP Pool Name
IP Address Range
DNS Server

15.4.2 DHCP Configuration

To activate your device as a DHCP server, you must first define IP address pools from
which the IP addresses are distributed to the requesting clients.
A list of all configured IP address pools is displayed in the Local Services->DHCP
Server->DHCP Configuration menu.
In the list, for each entry, you have the possibility under Status of enabling or disabling
the configured DHCP pools.
328
Description
Enter any description to uniquely identify the IP pool.
Enter the first (first field) and last (second field) IP address of
the IP address pool.
Primary: Enter the IP address of the DNS server that is to be
used, preferably, by clients who draw an address from this
pool.
Secondary: Optionally, enter the IP address of an alternative
DNS server.
Note
In the ex works state the DHCP pool is preconfigured with the IP addresses
192.168.0.10 to 192.168.0.49 and is used if there is no other DHCP server
available in the network.
Gigaset Communications GmbH
icon to edit exist-
hybird 120 Gigaset Edition