Troubleshooting; Manual Test Mode - Motorola A1200 Service Manual

Troubleshooting

Troubleshooting

Manual Test Mode

43
Motorola A1200 telephones are equipped with a manual test mode capability. This
allows service personnel to verify functionality and perform fault isolation by
entering keypad commands.
To enter the manual test command mode, a GSM / DCS test SIM must be used.
1. Turn the phone OFF.
2. Remove the battery as described in the procedures.
3. Remove the customer's SIM card from the phone as described in the
procedures.
4. Insert the test SIM into the SIM slot.
5. Replace the battery as described in the procedures.
6. Turn the phone ON.
7. On the main screen, tap the phone icon to switch the phone to dial mode.
8. On the dial mode screen, tap and hold the # key for 3 seconds to enter the Test
Menu.
December 21, 2005
A1200
6809499A19-O