Removing And Replacing The Camera/Voice Keys - Motorola A1200 Service Manual

Disassembly

Removing and Replacing the Camera/Voice Keys

39
7. Remove the battery cover, battery, SIM, stylus, rear housing, antenna
assembly, camera module, and transceiver PC board assembly as described in
the procedures.
8. Use the plastic tweezers to remove the camera/voice keys from the front
housing (see Figure 19).
Plastic tweezers
Figure 19. Camera/Voice Keys Removal
9. To replace, use the plastic tweezers and the pointed end of the disassembly tool
to insert the camera/voice keys into their slot in the front housing. Use the
guides molded into the front housing to place the keys correctly.
10. Test the keys for proper operation when replacing the transceiver PC board
assembly.
11. Replace the display assembly, transceiver PC board assembly, camera module,
antenna assembly, rear housing, SIM, stylus, battery, and battery cover as
described in the procedures.
December 21, 2005
Front housing
Camera/Voice Key
A1200
051620o
6809499A19-O