Disassembly
Removing and Replacing the Transceiver PC Board Assembly
G
35
1.
Remove the battery cover, battery, SIM, stylus, rear housing, antenna
assembly, and camera module as described in the procedures.
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
2.
Use the disassembly tool to unseat the flip speaker Flex connector from the
transceiver PC board assembly (see Figure 15).
Figure 15. Removing the Flip Speaker Flex Connector
December 21, 2005
Flip speaker flex connector
A1200
051591o
6809499A19-O