Removing And Replacing The Display Module Assembly - Motorola A1200 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Display Module Assembly

G
6809499A19-O
1. Remove the battery cover, battery, SIM, stylus, rear housing, antenna
assembly, camera module, and transceiver PC board assembly as described in
the procedures.
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
2. Use the disassembly tool to lift the display module assembly from the front
housing (see Figure 18.
Figure 18. Removing the Display Assembly
3. Carefully lift the display assembly away from the transceiver PC board.
4. To replace, align the display module to the front housing.
5. Lower the display module into place in the front housing until properly seated.
6. Replace the transceiver PC board assembly, camera module, antenna
assembly, rear housing, SIM, stylus, battery, and battery cover as described
in the procedures.
December 21, 2005
Display module assembly
Disassembly
051619o
38