Motorola A1200 Service Manual page 37

Level 1 and 2 Service Manual
6809499A19-O
3. Use the disassembly tool to pry the housing away from the headphone socket
on transceiver PC board just enough to lift the transceiver PC board out of the
front housing (see Figure 16).
Transceiver PCB Assembly
Headphone
Socket
Figure 16. Removing the Transceiver PC Board Assembly
4. Carefully lift up the headphone socket end of transceiver PC board up while
leaving the motor vibrator end of the transceiver PC board close to the front
housing.
December 21, 2005
Disassembly tool
Disassembly
051617o
36