Software Installation - HP 9000 Installation And Configuration Manual

Software Installation and Verification

Software Installation

CAUTION
NOTE
34
Software Installation
Read the ACC software from the installation media, in superuser mode,
using the swinstall utility.
You must consult the Release Notes with this product for important
details, particularly about required HP-UX patches. Install them before
proceeding.
1. Log in to the system as "root".
2. Place the media in a local or remote CD-ROM drive.
3. Run swinstall, which behaves the same in the GUI interface as for
the terminal interface. When the ""Specify Source"" box opens, select
""Source Depot Type"" to "Local CDROM", or for a remote CD-ROM
driver, select for "Network Directory/CDROM" and set "Source Host
Name...". Select "OK".
4. Select the ACC Base Software and any other ACC items to be
installed, from the list of software bundles; open the "Actions" menu
and select "Mark for Install".
5. When all items have been marked, select "Install (analysis)"; select
"OK" and proceed.
A final Confirmation message informs you that a new kernel will be
rebuilt using the filesets installed, and the system will reboot. When you
are ready, select "Yes".
The "Install (analysis)" window allows you to track summary progress of
the installation process. Use the "Logfile" feature to display a detailed
status, which is logged to /var/adm/sw/swagent.log.
Chapter 2