Kernel Configuration - HP 9000 Installation And Configuration Manual

Hide thumbs Also See for 9000:

Table of Contents

Chapter 2

Kernel Configuration

If the error message ENOSPC is encountered during download of the

ZCOM Subsystem, it may be due to an insufficient value in configurable

parameter semmnu. To increase the value of this parameter:

1. Run SAM (logged in as superuser) and select the "Kernel

Configuration" menu.

2. Under Kernel Configuration, select the "Configurable Parameters"

option, which presents a listing of the various parameters of interest.

3. Scroll down the list and select the parameter named semmnu.

4. Open the "Actions" menu and click on the "Modify Configurable

Parameter" option.

5. Choose the "Specify NewFormula/Value" option and enter a value

that increases the one displayed by the number of ACC cards which

have been added to the system.

When you exit SAM, you will be prompted to regenerate and reboot the

system.

Software Installation and Verification

Important Installation and Configuration Notes

Table of Contents