Hardware Installation; Adding Or Moving Mux Cards - HP 9000 Installation And Configuration Manual

NOTE
Chapter 2

Hardware Installation

Install the ACC Mux card or cards on your HP 9000 computer according
to the instructions in the appropriate ACC Multiplexer Hardware
Installation and Reference Manual. We highly recommend that you
install the hardware before the ACC software is installed. The ACC
installation process creates ttgen configuration files based on the actual
locations of installed ACC Mux cards.
If the system will only run application programs using the ZCOM
application interface to access ACC Mux cards on remote systems, you do
not need to install any ACC Interface cards on your local system.

Adding or Moving Mux Cards

If any ACC interface cards are added to the system or moved within the
system after the ACC base product is installed, the sample loopback
configuration file will need to be updated. See "Adding or Moving
Hardware After Installation" on page 36 for detailed information.
Software Installation and Verification
Hardware Installation
33