Checking Port Modes - HP 9000 Installation And Configuration Manual

Dual Interface Configurations

Checking Port Modes

HPAMS1R> zmntr
ZMNTR: ZCOM 6.2.0.0 Runtime Monitor, Rev 1.0
ZMNTR> mx,1
Interface card information for ACC X.25 ttgen input file
TTGEN source /usr/zcom/opt/acc/cfg/duplex.answ
object /usr/zcom/opt/acc/cfg/duplex.tmem
Mux:01 Bus:00/01 Slot:03 Trms:0004 Card Stat:Up and active
Firmware download file:
Module: X25
ROM-ID: UMUX302A [04.X]
Connection: Dual system RS232 panel
Pt# Status TXlim TXusd PMode Cmode Ecde Clk Baudrate Mult Parity Stbits
0 Up 20000
1 Up 20000
2 Up 20000
3 Up 20000
4 Up 20000
5 Up 20000
6 Up 20000
7 Up 20000
ZMNTR>
64
Checking Port Modes
Use the mx command of the zmntr utility to view the current mode of the
ports on a given MUX. For example, to view the ports on MUX 1 of an 8
channel ACC card:
/usr/zcom/opt/acc/z7200a/x25.zabs
Linktime: Mon Aug 18 15:55:37 1997
Updated:
0 TriSt SDLC
0 TriSt SDLC
0 TriSt SDLC
0 TriSt SDLC
0 TriSt SDLC
0 TriSt SDLC
0 TriSt SDLC
0 TriSt SDLC
Tue Aug 04 08:50:00 1992
Mux MPU utiliz:
NRZ Int 9,600
NRZ Ext 9,600
NRZ Int 9,600
NRZ Ext 9,600
NRZ Int 9,600
NRZ Ext 9,600
NRZ Int 9,600
NRZ Ext 9,600
1%
X.1 None
X.1 None
X.1 None
X.1 None
X.1 None
X.1 None
X.1 None
X.1 None
Chapter 4