HP 9000 Installation And Configuration Manual page 43

# /opt/acc/bin/zmasterd stop
Chapter 2
Zmasterd starts the daemons that are listed with "start" statements in
the /opt/acc/cfg/zmasterd_list file. For the base ACC product, zmasterd
starts the zmlog logging facility, zmon, and znode.
If any error is reported during the start up procedure, it may be
necessary to stop the ZCOM subsystem by running:
The error should be addressed, and then the ZCOM subsystem should be
restarted. Refer to the ACC Error Guide, for information on the
messages reported by zmlog.
Note that file /opt/acc/cfg/zmasterd_list refers to
/opt/acc/cfg/loopback.tmem by default. If another .tmem file is be used,
you should update this file accordingly. Refer to the ACC Utilities
Reference Guide for more information on the use of zmasterd.
Software Installation and Verification
Installation Verification
43