HP 9000 Installation And Configuration Manual page 86

ACC Service Guard Configuration Notes
Overview
# disable the ports to "lback"
# See example "setLBACK.zterm" script below.
/opt/acc/bin/zterm /opt/acc/cfg/setLBACK.zterm
syslog_msg Stopping ACC subsystem
/opt/acc/bin/zmasterd stop
# this last entry is really only needed for patch install, or
# product removal
# a 5 sec sleep is recommended here (SR # 5000-716977)
sleep 5
/opt/acc/bin/zmasterd kill
******************* Example /opt/acc/cfg/zmasterd_list **************
# HP Z7250A- /opt/acc/cfg/zmaster_list file
# Start these daemons when zmasterd is started, and monitor them:
# Start zmlog with -nd option for no console logging.
start zmlog -nd
start zmon cold /opt/acc/cfg/sna_acc_sdlc.tmem
start znode
# Stop these daemons when zmasterd is run with the stop option.
stop zmon
stop znode
# Add other start and stop statements below:
#
# Replace this with SNAPlus2 initialization -- If required.
# sched zx25d_init
start watch
stop watch
******* example zterm command file "setRS232.zterm" *******
pt,0,0,2,3,0000H,0000H
pt,0,1,2,3,0000H,0000H
pt,0,2,2,3,0000H,0000H
pt,0,3,2,3,0000H,0000H
pt,0,4,2,3,0000H,0000H
pt,0,5,2,3,0000H,0000H
pt,0,6,2,3,0000H,0000H
pt,0,7,2,3,0000H,0000H
ex
******* example zterm command file "setLBACK.zterm" *******
pt,0,0,2,3,0000H,8000H
pt,0,1,2,3,0000H,8000H
pt,0,2,2,3,0000H,8000H
86 Appendix C