Table of Contents
Advertisement
36
www.aeg.com
Problem
The display shows an error
code that is not in this table.
Steam and condensation
settle on the food and in the
cavity of the oven.
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
14. INSTALLATION
WARNING!
Refer to Safety chapters.
Possible cause
There is an electrical fault.
You left the dish in the oven
for too long.
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
14.1 Building in
Remedy
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
The built-in unit must meet
the stability requirements of
DIN 68930.
Advertisement
Table of Contents
