Installation Of Thermistor On Gas Pipe - Panasonic PAW560MAH2L Installation Instructions Manual

● The thermistor wire must point downwards from the thermistor to avoid water
reaching the thermistor.
● The thermistor wire must be inserted drooped in the AHU body with the droop-
ing wire being close to the AHU Kit.
i
Important
If there are multiple heat exchangers in one ECOi system, an individual thermistor must be
installed for each heat exchanger.

4.4.1 Installation of thermistor on gas pipe

Installation of thermistor on gas pipe – ECOi and ECO G systems
Mount "E3" thermistor to gas pipe of AHU heat exchanger according to the following
instructions.
For PAW-160MAH2(L)
1. Attach the gas pipe thermistor onto the collecting gas pipe in the heat exchanger.
Inside of AHU
AHU Kit
Drooping wire
Installation
43