7
Control
7.1
Remote controller
The standard Panasonic wired remote controller CZ-RTC2 is an integral part of the AHU Kit. All
control and setting operations for the ECOi, ECO G or PACi system can be performed on this
remote controller.
i
Important
The relevant control operations are described in the "Operating Instructions" manual for the
CZ-RTC2 remote controller. It is supplied with the AHU Kit or can be downloaded from the "Ser-
vice" section at www.panasonicproclub.com.
7.2
Thermostat
The advanced version of the AHU Kit features a thermostat (temperature controller), which can
optionally be set and parametrized separately if using the controller is required.
i
Important
The thermostat is not included in the „light" version of the AHU Kit.
7.2.1 Control and display elements
1
Display "PV": Process value
2
Display "SV": Set value
3
Button "Down"
4
Button "Up"
5
Button "Set"
8
7
6
5
6
7
8
1
2
3
4
Button "Left"
LED "Alarm"
(ON when Auto-Tuning is active)
LED "Out"
(ON when Process Value is lower than Set Value)
Control
61