Parts and Functions
This section explains the names and functions of the ScanSnap parts.
Front
No.
Name
1
ADF paper chute (cover) (*1)
2
ADF top section
3
Extension
4
Side guide
5
ADF release tab
6
[Scan] button (*1)
Description
Open it to use the ScanSnap.
Opening it turns on the ScanSnap. Then, you can load a document
on it.
Open it to remove jammed documents, replace the Roller Set, or
clean the inside of the ScanSnap.
Pull out when scanning long documents.
Adjust to the width of documents to prevent them from getting
skewed.
Pull this tab to open the ADF top section.
Starts scanning. Can be pressed even when the stacker is closed.
Indicates the status of the ScanSnap as follows:
Blue (lit): Ready
Blue (flashing): Scanning
Orange (flashing): Error
32
Parts and Functions
1
2
3
4
5
6
7
8