Interlogix AdvisorOne Panel Quick Installation Manual page 5

Checking Battery Status (after initialization)
1. Press the Settings icon
2. Press CONFIGURATION to enter programming.
3. Enter the installer or dealer access code (see table 5).
4. From the Configuration & Programming screen, press TEST.
5. From the Test screen, press BATTERY.
6. To start the battery test, press START. The results are displayed after the battery test is complete.
Initialization
When power is first applied (and if the panel was not previously initialized), an initial screen appears. This screen is part of the
installation wizard startup sequence. The wizard runs only one time at installation (unless the system has been reinstalled).
The wizard startup sequence provides a series of prompts. Each prompt requires a response before moving to the next. See Table 3
for a description of the initial power up screen prompts.
Upon initial installation, the system will check the backup battery. If the battery is low, it may take up to 48 hours to become fully
charged. During this time, a system-status-attention icon
battery is sufficiently charged.
Press the System Status Attention icon
battery is charged, if the panel loses AC Power and experiences a low battery condition, the low battery icon will appear and trouble
beeps will sound unless silenced.
Table 3: Initial Power Up Screens
Option Description
Select Language Select the language the system will display and speak.
Select Defaults Select the following panel defaults:
•
•
•
Set Downloader This field is used for the Enterprise Downloader Account. Reporting account numbers must
Account be set in reporting configuration.
Set Local Time Set the local time
Main Screen
Upon successful completion of initialization, the main screen will be displayed. See Figure 5.
Figure 5: AdvisorOne Main Screen
Top Bar
The Emergency Button, Time
and Date, and Dealer
Information.
Folder
Displays application and alarm
information.
Bottom Bar
Provides access to system
status, settings, applications,
and arming options.
AdvisorOne Panel Quick Installation Guide
on the lower left of the main screen.
to verify that the Low Battery icon
Single Partition
Multiple Partitions
Region specific Single Partition (select models only)
will be shown on the main screen and trouble beeps will occur until the
is present on the system status screen. After the
At-A-Glance Icons
Provides sensor status for all
monitored Doors, Windows,
Motions, Property, and Assets.
5 / 18