Dahua 6064 SERIES User Manual page 61


Redundancy: System supports redundancy backup function.
two disks. You can highlight Redundancy button to activate this function. Please note, before enable
this function, please set at least one HDD as redundant. (Main menu->Setting->Storage->HDD
Manager). Please note this function is null if there is only one HDD.

ANR: It is to save video to the SD card of the network camera in case the network connection fails.
The value ranges from 0s～43200s. After the network connection resumed, the system can get the
video from the SD card and there is no risk of record loss.

Period setup: Click button
Figure 3-46.There are five record types: regular, motion detection (MD), Alarm, MD & alarm , and
intelligence.
Please following the steps listed below to draw the period manually.
a) Select a channel you want to set. See Figure 3-42.
b) Set record type. See Figure 3-43.
c) Please draw manually to set record period. There are six periods in one day. See Figure 3-44.
Please check the box
click save button, system goes back to the previous menu.
There are color bars for your reference. Green color stands for regular recording, yellow color stands
for motion detection and red color stands for alarm recording , and orange color stands for intelligent
alarm. The white means the MD and alarm record is valid. Once you have set to record when the MD
and alarm occurs, system will not record neither motion detect occurs nor the alarm occurs.
after one date or a holiday, you can see an interface shown as in
Figure 3-42
Figure 3-43
Figure 3-44
to select the corresponding function. After completing all the setups please
It allows you backup recorded file in
51