Setting; General; Date And Time - Dahua 6064 SERIES User Manual

4.8.5 Setting

4.8.5.1 General

The general interface includes general, date/time and holiday setup.
4.8.5.1.1 General
From main menu->Setup->System->General->General, the general interface is shown as in Figure 4-86.
Please refer to the following sheet for detailed information.
Parameter
Device ID
Device No.
Language
Video
Standard
HDD full
Pack
duration

4.8.5.1.2 Date and time

From main menu->Setup->System->General->Date and time, the date and time interface is shown as in
Figure 4-87
Figure 4-86
Function
It is to set device name.
It is device channel number.
You can select the language from the dropdown list.
Please note the device needs to reboot to get the modification
activated.
This is to display video standard such as PAL.
Here is for you to select working mode when hard disk is full. There
are two options: stop recording or rewrite. If current working HDD is
overwritten or the current HDD is full while the next HDD is no empty,
then system stops recording, If the current HDD is full and then next
HDD is not empty, then system overwrites the previous files.
Here is for you to specify record duration. The value ranges from 1 to
120 minutes. Default value is 60 minutes.
184