Alarm - Dahua 6064 SERIES User Manual

4.11 Alarm

Click alarm function, you can see an interface is shown as Figure 4-122.
Here you can set device alarm type and alarm sound setup (Please make sure you have enabled audio
function of corresponding alarm events.).
Please refer to the following sheet for detailed information.
Type
Alarm
Type
Figure 4-121
Figure 4-122
Parameter Function
Video loss System alarms when video loss occurs.
Motion detection System alarms when motion detection alarm
occurs.
Tampering System alarms when camera is viciously masking.
Disk full System alarms when disk is full.
Disk error System alarms when disk error occurs.
External alarm Alarm input device sends out alarm.
204