Ftp; Upnp - Dahua 6064 SERIES User Manual

Parameter
Health mail
enable
Update period
(interval)
Email test

4.8.2.7 FTP

From main window->Setup->Network->FTP, the FTP interface is shown as in Figure 4-32.
It is to set FTP IP, port and etc for remote storage.

4.8.2.8 UPnP

From main window->Setup->Network->UPnP, here you can also add, modify or remove UPnP item. See
Figure 4-33.
It allows you to establish the mapping relationship between the LAN and the public network.
 In the Windows OS, From Start->Control Panel->Add or remove programs. Click the "Add/Remove
Windows Components" and then select the "Network Services" from the Windows Components
Wizard.
 Click the Details button and then check the "Internet Gateway Device Discovery and Control client"
and "UPnP User Interface". Please click OK to begin installation.
Function
Please check the box here to enable this function.
This function allows the system to send out the test email to
check the connection is OK or not.
Please check the box to enable this function and then set the
corresponding interval.
System can send out the email regularly as you set here.
The system will automatically sent out a email once to test the
connection is OK or not .Before the email test, please save the
email setup information.
Figure 4-32
152