Table of Contents
Advertisement
B
The second cable calibration summary could take as long as 3 minutes and 8
seconds before being displayed, due to the nature of the multi-tasking environment
of the TAS unit and the method by which tasks are delayed.
10. Viewing Current System Status
This option allows the user to view the current TAS unit system status without hav-
ing to try to read the LEDs located on the side or front of the TAS unit (see
9). This data may be viewed two different ways; Overwrite or Continuously.
The status is updated every second or two. The system's status is indicated along
with the state of the LED indicator. When a fault occurs, a brief description is added
to the LED fault information. To stop the update, click the Stop button on the button
bar.
Rev 3, August/2002
Figure 8 Cable Calibration Data Window
10609I03.CDL
NOTE
KMH 880/KTA 870
Figure
D-18
Advertisement
Table of Contents
