Table of Contents
Advertisement
B
The selections are made using list boxes and radio buttons. Click the down arrow on
the list boxes and click the desired configuration. For radio buttons, click the desired
configuration button.
Once the user is satisfied with the strapping, click the OK button and the user will be
prompted as to whether or not to write the data to the configuration module. Click
the cancel button to exit without saving changes.
If the user opts to write the data to the configuration module, a message window will
appear informing the user that the data is being written, the TAS unit is resetting,
and the user should wait until the initialization is complete. When the TAS unit is ini-
tialized, a message will be displayed in the window. At this point the user may click
the OK button to continue.
Rev 3, August/2002
Figure 5 Modify Straps Window
10609I03.CDL
KMH 880/KTA 870
D-12
Advertisement
Table of Contents
