Table of Contents
Advertisement
B
1.
Introduction
The TAS Processor Field Diagnostics Program (TAS Diag) provides an interface to
the KMH 820/KTA 810 (TAS Processor Unit). The following information may be
retrieved from the TAS Unit via TAS Diag:
-
I/O data (straps, attitude, altitude, etc.),
-
TAS's Internal Diagnostic and Log File,
-
Configuration module straps,
-
Currently tracked intruder data (range, altitude, bearing, etc.),
-
Cable calibration data,
-
Current system status (fault LED reading and description).
TAS Diag for Windows has four different diagnostic windows:
•
Main Diagnostic Window
•
IO Continuous Window
•
Intruder Data Window
•
System Status Window
All data may be written to a user-specified file by clicking Save from the File menu.
The active (selected) window will be saved.
A TAS Diag demonstration mode, in which no RS-232 communications are present,
is available for familiarizing the user with the program. Select Demo Mode from the
File menu.
This document is an operations manual for TAS Diag, providing tips and techniques
enabling TAS Diag to be a useful tool in installation and/or troubleshooting KMH
820/KTA 810 TAS Processors.
The following Part Numbers identify the TAS Diag program and documentation:
700-01055-0000 User Manual (this documentation)
222-30007-0002 CD-ROM containing KTA Diag for Windows and User Manual
2.
Computer Requirements
The TAS Diag program requires a personal computer with a CD_ROM running
Microsoft Windows 95, Windows 98, or Windows NT 4.0 . The user should be famil-
iar with running Windows programs.
Rev 3, August/2002
10609I03.CDL
KMH 880/KTA 870
D-5
Advertisement
Table of Contents
