Table of Contents
Advertisement
B
4.1 TAS Diag Demonstration Mode
The TAS Diag program contains a demonstration mode (in the file menu) which is
useful for familiarizing the user with available options. The demonstration mode
does not require an RS-232 connection to a TAS unit. Any option may be selected,
and a simulation TAS unit response will occur.
5.
Inspecting Current Processor I/O Data
There are two options for inspecting the TAS unit's I/O data: single snapshot or con-
tinuous ( see Figure 2).
Figure 2 I/O Data View Continuous Window
Rev 3, August/2002
10609I03.CDL
KMH 880/KTA 870
D-8
Advertisement
Table of Contents
