Configuration Types (Categories); Configuration Identification Selection (Id) - Honeywell KMH 880 Installation Manual

B

4.2.3.6 Configuration Types (Categories)

The selection of the basic interfaces to the EGPWS can be found in the follow-
ing categories.
Aircraft/Mode Type
Air Data Type
Position Type
Terrain Display Type
I/O Discretes Types
Audio Menu Type
Audio Output Level Type
Altitude Monitor Options Type
Terrain Display Alternate Pop up Option Category 9
Digital Magnetic Heading
Display Options
4.2.3.7

Configuration Identification Selection (ID)

The method to select the Configuration Identification (ID) for each Category
Type on a given aircraft installation is with the information in this document and
the following table. This table provides the procedure to determine the Config-
uration ID selection required for any given aircraft installation.
STEP
(CATEGORY) SELECTION
Selects:
1 a) Aircraft Type
b) Mode Type
Selects:
2 a) Air Data
Source
Selects:
3 a) Position
Source
Selects:
4 a) Display
Configuration
Rev 3, August/2002
SIGNAL
Using
contained within, locate the Aircraft/
Mode type.
Using
contained within, locate the desired
Air Data signal type.
Using
contained within, locate the desired
Position Signal type.
Using
contained within, locate the desired
Display indicator type/range bus
type.
Category 1
Category 2
Category 3
Category 4
Category 5
Category 6
Category 7
Category 8
Category 10
Category 11
INSTRUCTION
Table 4-2 and any sub-tables
Table 4-3 and any sub-tables
Table 4-4 and any sub-tables
Table 4-5 and any sub-tables
10609I03 CDL
KMH 880/KTA 870
Record the Ident (ID
No.) on the space
available on Ident
column of this table.
Record the Ident (ID
No.) on the space
available on Ident
column of this table
Record the Ident (ID
No.) on the space
available on Ident
column of this table.
Record the Ident (ID
No.) on the space
available on Ident
column of this table.
Page 4-5
IDENT.
NO.
_____
ID #
_____
ID #
_____
ID #
_____
ID #