Using The Print Wizard - Interacoustics affinity 2.0 Instructions For Use Manual

Affinity Instructions for Use - US

3.5 Using the Print Wizard

In the Print Wizard you have the option to create customized print templates which can be linked to
individual protocols for quick printing. The Print Wizard can be reached in two ways.
a. If you want to use a template for general use, or select an existing one for printing: Go to Menu/
File/Print Layout... in any of the Affinity2.0 Suite tabs (AUD, REM or HIT)
b. If you want to create a template or select an existing one to link to a specific protocol: Select the
Module tab (AUD, REM, or HIT) relating to the specific protocol and select Menu/Setup/AC440
setup, Menu/Setup/REM440 setup, or Menu/Setup HIT440 setup. Select the specific protocol
from the drop down menu and select Print Setup at the bottom of the window.
Now the Print Wizard window opens and shows the following information and functionalities:
1
11
1. Underneath Categories you can select
•
Templates to show all available templates
•
Factory defaults to show only standard templates
•
User defined to show only custom templates
•
Hidden to show hidden templates
•
My favorites to show only templates marked as a favorite
2. Available templates from the selected category are shown in the Templates viewing area.
3. Factory default templates are recognized by the lock icon. They ensure that you always have a
standard template and do not need to create a customized one. However, in order to edit these
default templates, they need to be saved under a new name. User defined/created templates
can be set to Read-only (showing the lock icon), by right clicking on the template and selecting
Read-only from the drop down list. Read-only status can also be removed from User defined
templates by following the same steps.
4. Templates added to My favorites are marked with a star. Adding templates to My favorites
allows quick viewing of your most commonly used templates.
5. The template that is attached to the selected protocol when entering the print wizard via the
AC440 or REM440 window is recognized by a checkmark.
6. Press the New Template button to open a new empty template.
2
5
12a
12b
6
3 4
13
Page 48